DESIGN IT. BUILD IT. RACE IT.
Settings
Saved on this device

Your next circuit starts here.

Pick a track piece on the left,
or create one with your own dimensions.

Closed circuitNominal dimensions · mm
Drag to select · Shift-click to add · Space + drag to pan
100%
Two cars · slot-following demonstration
DESIGN THE SLOTS · BUILD IN WOOD

Routed Wood

Set your routing profile on the left, then build the layout from routed sections in the builder.

Profile preview

No moulded connectors or lane markings. All lanes are generated together from the profile.

Materials estimate

Conductors include both sides of every slot, plus your chosen allowance. Sections are design elements, not physical boards.

Planning checks

    2D footprint checks do not verify vehicle clearance, structural strength or bridge heights.

    Saved routed packs

    Create routed section

    Measure from the bend centre to the innermost slot centre. Every next slot adds one lane spacing.

    Lane spacing

    Works on straights and bends: smoothly squeezes or spreads lanes, returning to normal spacing at both ends. Circular corners become editable flowing approximations; reset restores uniform spacing on that path. Slot numbers stay attached to their paths when mirrored. Check car clearance separately.

    Piece clearances define its wood outline. Tabletop clearances apply to the table boundary. Profile defaults affect new sections; existing sections keep their own settings.

    MAKE YOURSELF AT HOME

    Settings

    Choose how Circuit looks and measures.

    Return to builder

    App Theme

    Current: Dark

    Choose a theme, or make your own colours below. The whole app changes as you choose.

    Your own colours

    Change any colour to switch to Custom. Your custom palette stays available when you try other themes.

    Replaces your custom palette.

    Themes change the interface. Track pieces keep their physical colours, and PDF reports stay printer-friendly.

    YOUR SAVED CIRCUITS

    Track Library

    Save complete layouts with their pieces, timing line and tune profile.

    Saved in this browser on this device. Download JSON backups to move designs elsewhere or protect them from cleared browser data. Changes in the builder are saved to a library design only when you choose Save to library.

    Return to builder

    ← TRACK PACKS

    Edit your pack

    Group your own straights, curves, borders and lane changers into a named pack.

    Custom / unbranded

    Back to Track Packs

    The pieces below belong to the selected pack. Add pieces to your layout or use “Copy & adjust” to make a new version. Existing definitions stay unchanged.

    Pieces in this pack

    Delete unwanted pieces individually, or select several to clean up this pack. Existing track layouts keep their copies.

    SAVE · SHARE · BRING IT INTO CIRCUIT

    Import & Export

    Choose a complete track design or a reusable collection of track pieces.

    Return to builder

    Import a track

    Open a .slotforge.json or .json track file in the builder, then choose Save to Library to keep a named copy. You can back up your current track before replacing it.

    1. Choose your track

    2. Choose your format

    Each format exports the track selected above.

    Track file (.json)

    Download the complete editable track, including its pieces, custom definitions, table, heights and car profile. Keep it as a backup, share it, or reopen it using Import track JSON.

    Saves a .slotforge.json file. This same file is also used for SlotForge Timing integration.

    SlotForge Timing compatibility

    Integration contract 1.0.0-draft.2. PNG is optional.

    PDF report

    Download a printer-friendly PDF with the track picture, lengths and parts list. Choose portrait or landscape; no print dialog needed.

    PNG picture

    A transparent image for sharing or track database cards.

    CSV parts list

    Piece names, quantities and nominal lengths for a spreadsheet.

    SVG / DXF construction drawing

    Full-size routed geometry for a vector editor or CAD. Choose separate layers for slots, braid/tape, surface contours and the table.

    Available for layouts with routed sections.

    PIECES FOR YOUR NEXT CIRCUIT

    Track Packs

    Find your track system, bring in a shared pack, or create a collection of your own pieces.

    YOUR SAVED WORKSPACE

    Upgrading your saved library

    Circuit is converting your tracks and custom packs to SQLite automatically. Please keep this window open while we check and copy your saved work.

    Your original JSON files and backups are kept unchanged. No export, import or database setup is needed.

    Your saved files

    Installed disk mode uses SQLite. Your older JSON files are kept when upgrading. Browser-data clearing and app updates do not remove your disk library. Download a workspace backup to keep a portable copy; stop the app before copying its data folder.

    Moving from an old file:// tab? Open Storage in that tab, download a workspace backup, then import it here. Imported current work is added to the Track Library; your current drawing is kept.

    Save to Track Library

    Delete pieces from this pack?

    This removes these pieces from the pack and its catalogue. Pieces already placed in your current track or saved Track Library designs are kept. Export the pack first if you want a backup.

    Delete saved design?

    This removes the library snapshot. A layout already open in the builder and downloaded files are kept.

    Available space

    Set the area available for your track. The guide sits behind the pieces at the same scale.

    Unlocked: drag the tinted area to move it, or the bottom-right handle to resize. Hold Shift while resizing to keep its proportions. Locked: clicks pass through the guide; use Unlock guide above the canvas to edit it again.

    Only the guide changes size; track pieces keep their physical dimensions. For routed sections, the planning checks report sampled 2D overlaps and table fit; vehicle clearance and bridge heights still need checking.

    CUSTOM TRACK PACK

    Create a track piece

    Choose a brand only if your connectors physically match. Slot spacing is independent of road width. Dimensions are your measurements, not manufacturer verification.

    Track piece reference

    Use this artwork to plan a layout even when measurements are incomplete. Planning magnets align approximate road ends; they do not create guide slots or validate physical fit. PDFs include the picture and quantities.

    These dimensions guide the drawing and magnets. Use matching road widths within the same track pack. Left/right Hybrid pieces keep their own artwork and handedness.

    Add borders

    Matching border sections come from the same connector family. Smaller sections are repeated where needed.

    Already placed borders are skipped. Border fit uses nominal dimensions; overlaps with other roads are not checked. New borders join your selection so you can move them with the road.

    Start from a template

    Templates use your system’s standard straight and curves, so they close exactly.

    Replace this track?

    Export your current track as JSON before replacing it if you want to keep a backup. Exporting does not replace it; choose Replace track when you are ready.

    Create a track pack

    Add as many different piece shapes as you need, then save the pack to your library.

    Export a track pack

    Export PDF

    A white report with readable text, a track drawing, lane lengths and a parts list. Long lists continue on additional pages automatically.